BrothersInArms
Supporting Vendor
Hey guys. Just wanted to show you what we can do with the Saiga shotguns and rifles. I want to start by saying that we do these the RIGHT way! We don't cut corners... we don't use cheap plastic plugs like most shops out there, and we're not "bolt-on gunsmiths". We machine a lot of our own parts in house. We address the real issue with the Saiga 12 cycling problems... the gas ports and block. We don't try to sell you expensive band aids that won't fix your gun. More on that later.
Our basic receiver conversion is $300. That covers a new G2 FCG and moving it forward in the receiver, welding up the holes that are left, your 922r compliance, a Hogue grip, a weld in back plate drilled and tapped ready for the stock of your choice, and a single color duracoat job.
The first pic is of a stock Saiga 12... for those who haven't seen one. Second, is with the back plate welded in place, and you can see the holes from where the fire control group once was. The third pic is of that same receiver with all those holes tig welded and resurfaced... the way the AK was designed to be.
More on the way.
Our basic receiver conversion is $300. That covers a new G2 FCG and moving it forward in the receiver, welding up the holes that are left, your 922r compliance, a Hogue grip, a weld in back plate drilled and tapped ready for the stock of your choice, and a single color duracoat job.
The first pic is of a stock Saiga 12... for those who haven't seen one. Second, is with the back plate welded in place, and you can see the holes from where the fire control group once was. The third pic is of that same receiver with all those holes tig welded and resurfaced... the way the AK was designed to be.
More on the way.